Below are some pictures of some flowers which I took this morning. If you notice that they are very similar to my new layout then you would be right! These are actually the inspiration behind my colour scheme. Generally I like Pink and Purple anyway but these bright vibrant colours really spoke to me today!
Plus I have some new cabs in my Flickr album! I haven't had much time lately to make let alone take pictures of my cabs so what you see is what you get. I have an assignment to do some red and black cabs for a friend so that will be interesting to see how those come out! I have the day off work tomorrow to sort out some things so if I can get them done and dusted early then I will have time to play! Not looking forward to 'sorting' out those things though.
Make Over
Posted in on 4:31 PM by Bree Ferguson
I have been wanting to re-do my blog for awhile now. I wanted something quite simple but stilll bright and still 'me'. So I made myself a little heading and also a pretty little deco in the corner to match.
Any comments welcome about the new layout!
I have also decided to start posting in a bigger font. I was on the desktop the other day getting some bits off my blog and the front was tiny, I could barely read it!! So I thought to save you all from squinting...if you have to squint and post in a larger font.
Any comments welcome about the new layout!
I have also decided to start posting in a bigger font. I was on the desktop the other day getting some bits off my blog and the front was tiny, I could barely read it!! So I thought to save you all from squinting...if you have to squint and post in a larger font.
CZ's are a success!
Posted in on 8:11 PM by Bree Ferguson
Well today I finally got to play with my Cubic Zirconias! I first fused down some little black cabs to make some studs with then used my dremel to create little dents like the pics thats I showed yesterday on my tester piece. I thought I had done the hole too big as when I put the stones in they sat flush with the glass and I was worried the glass may melt over the top of the stones.However turns out that the glass must have filled in underneath first and it's pushed the stones up a little bit which is fine with me. They look so pretty and sparkly! Will get a photo soon althought it may be a little bit hard to get the sparkle.
Happy Happy Joy Joy
Posted in on 9:41 PM by Bree FergusonToday I finally got around to going to Bunnings (thats a hardware store for those of you who don't know) and I had a look at the Dremel stuff. As I have mentioned before in my posts the bit that I had to make dents for my Cubic Zurc's didn't fit my dremel so I needed to go and see if I could get another sized chuck. They had a packed of four different sized chucks and an extra collette so I took that because I wasn't sure what size I needed for my diamond bit. So this afternoon I was playing around with my new but not so new toy! It is sooo easy to use and so smooth and I am sooo happy!!
This is my little set up. You can see how messy my desk is! What a shocker. The glass has to be submerged in water to prevent the glass from cracking and also to keep it cool. It also helped to protect the diamond bit and make it last longer.

Here are my little holes!! I was testing out making bigger and smaller ones just for the different sizes of CZ's that I have. I tested the 2.5mm ones in the small hole and it fit almost perfectly!
Anyway while I was at Bunnings I was looking at the grinding stones because my dremel fell and clips my grinding stone and I was also checking out the engraving bits. Well I never knew diamond tip bits were SO expensive! One of the diamond tip engraving bits was $40 on its own.
So after some more looking Mum found this kit with 11 pieces in it. Two of which are diamond tip and I know I can use at least one of the bits as a grinding stone. Guess how much it was?? $25!!!!!! You'd have to be an idiot to pay $40 for one piece when this set was hanging less than a meter away. So I was very pleased with everything that I got today. I haven't opened my 11 piece set yet but I will be trying out the engraving very soon as well! Ah the ideas that are running around in my head.

Me is very happy!
This is my little set up. You can see how messy my desk is! What a shocker. The glass has to be submerged in water to prevent the glass from cracking and also to keep it cool. It also helped to protect the diamond bit and make it last longer.

Here are my little holes!! I was testing out making bigger and smaller ones just for the different sizes of CZ's that I have. I tested the 2.5mm ones in the small hole and it fit almost perfectly!

Anyway while I was at Bunnings I was looking at the grinding stones because my dremel fell and clips my grinding stone and I was also checking out the engraving bits. Well I never knew diamond tip bits were SO expensive! One of the diamond tip engraving bits was $40 on its own.
So after some more looking Mum found this kit with 11 pieces in it. Two of which are diamond tip and I know I can use at least one of the bits as a grinding stone. Guess how much it was?? $25!!!!!! You'd have to be an idiot to pay $40 for one piece when this set was hanging less than a meter away. So I was very pleased with everything that I got today. I haven't opened my 11 piece set yet but I will be trying out the engraving very soon as well! Ah the ideas that are running around in my head.

Me is very happy!
Test Complete
Posted in on 5:36 PM by Bree Ferguson
Well it seem thats the mixing of the COE 96 and 104 glass didn't go too bad!! I didn't have any glass reactions and the cab looks normal. Of course it could still be weakened and not last the distance of the normal cabs so once it is annealed I will be chucking it into my bag or wallet and see how it handles. If it doesn't crack or anything then it should be alright to make others and use in my jewellery or sell!!
Geeze the possibilities will be endless then!
I am hoping to drop off my made cabs tomorrow sometime to the lovely Nat. I do have a plan to make my nephew a pendant and put it on some leather thonging but I think I will put it off for tonight as it is really cold outside and I don't really feel like sitting out there tonight. But who knows, I might change my mind.
Still no study has been done...argh.
Geeze the possibilities will be endless then!
I am hoping to drop off my made cabs tomorrow sometime to the lovely Nat. I do have a plan to make my nephew a pendant and put it on some leather thonging but I think I will put it off for tonight as it is really cold outside and I don't really feel like sitting out there tonight. But who knows, I might change my mind.
Still no study has been done...argh.
Subscribe to:
Posts (Atom)




